Online refractometer

The AMT/ZGY-200 series online refractometer uses a digital CCD (photoelectric co


Description

Product Tags

The AMT/ZGY-200 series online refractometer uses a digital CCD (photoelectric coupler) to detect optical images and boundary shadow lines. The image information is converted into electrical signals point by point, and the exact position of the boundary shadow line is measured to determine the refractive index nD; The probe has a built-in temperature probe that measures the temperature of the medium at the interface in real time. The transmitter automatically compensates for the temperature based on the obtained nD and T, calculates and displays the concentration value of the liquid. The electrical signal is further amplified and converted into mass concentration, solid content Brix、 Display and remote transmission of density, refractive index, etc.

  1. Flexible installation methods (installed on pipelines, tanks, reactors, storage tanks, etc.), diverse installation methods, optional clamp/flange/thread installation;

  2. Not affected by the color, turbidity, viscosity, bubbles, solid impurities, crystals of the medium, and not affected by changes in liquid pressure, sudden changes in flow rate, or turbulence phenomena;

  3. User defined upper and lower limit alarms, touch screen input, simple and easy to understand operation, on-site alarm lights can be received;

  4. Before leaving the factory, each probe has been calibrated for refractive index nD and temperature T in standard units, and the calibration of each probe is completely consistentND=1.31... 1.54 (corresponding to 0-100Brix), built-in temperature compensation, delivered as a set, ready to install and use;

  5. The nonlinear conversion relationship between refractive index and concentration, as well as the temperature compensation database, are programmed in the split display controller, which is relatively independent of the probe;

  6. Each probe has the same calibration at the factory, and all probes can be freely exchanged without the need for recalibration or changing parameter settings. One display is available The controller can connect 1-3 probes;

  7. The self diagnostic function of the probe status makes the cause of the fault clear at a glance, facilitating on-site maintenance and emergency response;

  8. Built in concentration data processing system, for special working conditions, users can self establish data models on site, customize concentration curve correction coefficients Customize multi-point temperature compensation values to ensure data consistency and improve testing accuracy;

  9. RI calibration and adjustment function, users can perform RI calibration on-site according to the situation, execute adjustments to correct errors;

  10. Using intelligent chips, it operates without the need for reagents or consumables, with low power consumption. The internal light source of the probe has a lifespan of up to 100000 hours and high stability Long service life;

Leave Your Message


Write your message here and send it to us

Leave Your Message